Chief XVM1X1U Installation Manual download pdf (Page 6)

XVM1X1U Installation Instructions

3. Place clamp brackets (G) on columns with the top hole on

the brackets lined up with the fifth holes from the bottom of

the columns. (See Figure 3)

IMPORTANT ! : The upper and lower clamp brackets (G)

must be installed exactly 36" apart in order for the

uprights to fit correctly.

4. Use 5/16-18 x 4 1/2" button head cap screw (N), two 5/16"

washers (R) and 5/16-18" lock nut (V) to secure each clamp

bracket (G) to column. (See Figure 3)

5. Use four 5/16-18 x 3/4" button head flange screws (Q) to

secure each attached clamp bracket (G) to a quick connect

base (H). (See Figure 4)

Figure 4

6. Install two 5/16-18 x 3/4" button head flange screws (Q) into

the top holes on each quick connect base (H). (See Figure

Figure 5

7. Hang rails (D) into screws installed in previous step to quick

connect bases (H). (See Figure 5)

8. Install two 5/16-18 x 3/4" button head flange screws (Q) into

the lower holes on each quick connect base (H) to secure

rails (D) to quick connect bases. (See Figure 6)

9. Tighten all 5/16-18 x 3/4" button head flange screws (Q).

Figure 6

Display Installation

1. Place display face down on a soft, non-abrasive surface.

NOTE: For best access, route display cables through columns

prior to display installation. See Cable Management

section for details.

CAUTION: Using screws of improper size may damage

your display! Only use hardware provided to mount display.

2. Use M16 x 90mm socket head cap screws (Y) and spacers

(AA) to connect interface brackets (L) to back of display.

(See Figure 7)

Figure 7

(H)

(Q) x 4

(G)

(Q) x 2

(H)

(D) x 2

(Q) x 2

(Y) x 4

(AA) x 4

(L) x 2

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Chief XVM1X1U Installation Manual Page 6

Comments to this Manuals

Related products and manuals for Multimedia carts & stands Chief XVM1X1U