Chief XVM1X1U Installation Manual download pdf (Page 5)

Installation Instructions XVM1X1U

Assembly And Installation

Cart Assembly

1. Lay two cart array columns (E) down on a flat surface.

2. Use eight 5/16-18 x 2 1/2" button head cap screws (M) and

eight 5/16" washers (R) to connect cross bar (A) to columns

(E). (See Figure 1)

Figure 1

3. Use four 5/16-18 x 1/2" button head cap screws (T) to attach

two end brackets (J) to cross bar (A). (See Figure 1)

4. Use four 5/16-18 x 5" button head cap screws (P), four 5/16"

washers (R) and four 5/16-18" lock nuts (V) to secure right

and left legs (B and C) to cross bar (A). (See Figure 2)

NOTE: To ensure right and left legs (B and C) are assembled

on the appropriate side, make sure the smooth side of

the legs are to the outside when assembling to cross

bar (A).

5. Stand cart up on its wheels.

6. Proceed to Install Rails Section.

Figure 2

Rails Installation

1. Place clamp brackets (P) on columns with the top hole on

the brackets lined up with the top holes on the columns.

(See Figure 3)

Figure 3

2. Use 5/16-18 x 4 1/2" button head cap screw (N), two 5/16"

washers (R) and 5/16-18" lock nut (V) to secure each clamp

bracket (G) to column. (See Figure 3)

(M) x 8

(R) x 8

(A)

(E) x 2

(T) x 4

(J) x 2

(V) x 4

(B)

(C)

(R) x 4

(P) x 4

(rear view)

(V)

(R) x 2

5 holes

(N)

from bottom

(V)

(R) x 2

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Chief XVM1X1U Installation Manual Page 5

Comments to this Manuals

Related products and manuals for Multimedia carts & stands Chief XVM1X1U