Chief PAC735 User Manual download pdf (Page 6)

PAC735 Installation Instructions

4. Push base support back until it snaps in behind front cap of

cart base. (See Figure 4)

5. Tighten button head cap screw on cart side which was

loosened in Step 2. (See Figure 4)

6. Tighten two 5/16-18 x 1/2" square head cap screws (H) from

Step 1 further into cart until base support is secured to cart.

(See Figure 5)

Figure 4

Mount Storage Cabinet

1. Place storage cabinet (A) on top of base support. (See

Figure 5)

Figure 5

2. Place clamp bracket (D) around cart/stand and line up with

holes on back of storage cabinet (A). (See Figure 6)

3. Insert four 5/16-18 x 5/8" button head cap screws (G)

through clamp bracket holes and into holes on back of

storage cabinet (A). (See Figure 6)

Figure 6

Figure 7

4. Open either door on accessory to install remaining four

5/16-18" hex nuts (J) onto four 5/16-18 x 5/8" button head

cap screws (G) until accessory is fully secured to cart/stand.

(See Figure 6)

NOTE: Up to three storage cabinets can be stacked vertically

on top of each other per cart/stand. Repeat steps 1-4

for additional cabinets and use holes on top of cabinets

to bolt cabinets together.

(H) x 2

Base support

Front cap

of cart

(A)

Cart

(A)

(rear view)

(D)

(G) x 4

(to cart)

(to stand)

(rear view)

(A)

(D)

(G) x 4

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Chief PAC735 User Manual Page 6

Comments to this Manuals

Related products and manuals for Hardware Chief PAC735