Chief KSA1020B Installation Manual download pdf (Page 8)

KSA-1020 Installation Instructions

9. Place mounting bracket over anchors and align mounting

holes in mounting bracket with holes in anchors. (See

Figure 13)

10. Insert 1/4-20 x 1-3/4" Phillips pan head screw (E) into

mounting hole on mounting bracket and into anchor (B) and

tighten until flush against mounting bracket. DO NOT

overtighten! (See Figure 13)

11. Repeat Steps 9 and 10 for remaining mounting hole.

Figure 13

Installing CPU Mount to Wall

CAUTION: Overtightening screws may cause wall bracket

to compress into soft wall surface resulting in difficult mount

installation.

1. Ensure bracket flag is in the open position. (See Figure )

2. Insert mounting buttons into the four large mounting holes

on the bracket and lower into place. (See Figure 14)

Figure 14

3. Move flag to closed position in order to fully secure mount

to bracket. (See Figure )

Figure 15

Steel Stud

Drywall

Anchor Metal Channel

Mounting Bracket

(SIDE VIEW)

(E) x 2

Latch open

Latch closed

(rear view)

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Chief KSA1020B Installation Manual Page 8