Chief SL236SPI Installation Manual

INSTALLATION INSTRUCTIONSInstrucciones de instalaciónInstallationsanleitungInstruções de InstalaçãoIstruzioni di installazioneInstallatie-instructiesI

SL236i Installation Instructions102. Press in end tabs on both ends of yaw adjustment bracketand lock into place. (See Figure 11)3. Remove the yaw adj

Installation Instructions SL236i112. FORWARD/BACKWARD and PITCH• To shift projector backward or forward (or up or down),loosen the nuts on each end of

SL236i Installation Instructions12Figure 17Connecting Control Wiring1. Unplug the SL236i’s power cord (J) (used for testing).2. Remove the jumper wire

Installation Instructions SL236i13Table 1: WIRING TABLEFigure 18NOTE: The numbers listed in the SL236i Internal andSL236i External columns refer to th

SL236i Installation Instructions14Table 2: INTERNAL TERMINAL DESCRIPTIONS

Installation Instructions SL236i15Figure 19

SL236i Installation Instructions16

Installation Instructions SL236i17

SL236i Installation Instructions18

Installation Instructions SL236i19

SL236i Installation Instructions2DISCLAIMERMilestone AV Technologies, and its affiliated corporations andsubsidiaries (collectively, "Milestone&q

SL236i Installation InstructionsChief Manufacturing, a products divisionof Milestone AV Technologies8820-002033 Rev002011 Milestone AV Technologies,

Installation Instructions SL236i3TOOLS REQUIRED FOR INSTALLATIONPARTSI/Mx1 A (1) B (1) C (5)D (1) E (1) F (5)

SL236i Installation Instructions4LEGENDTABLE OF CONTENTSDisclaimer...2Tools Required For Installatio

Installation Instructions SL236i5DIMENSIONS23.8720.5023.0010.2528.85[698.5]25.00[669.3]MAXIMUM AVAILABLE SPACE FORPROJECTOR AND EQUIPMENTHxWxD = 9.25

SL236i Installation Instructions6INSTALLATION REQUIREMENTSNOTE: Throughout this document, reference to SL236i refersto both SL236FDi and SL236SPi mode

Installation Instructions SL236i7Figure 4Power Requirements and WiringThe SL236i requires 230VAC 50 Hz power to operate.NOTE: A 6 ft. long power cable

SL236i Installation Instructions82. Pull down on each corner of ceiling panel to remove ceilingpanel clips from rectangular holes. (See Figure 5)3. In

Installation Instructions SL236i9Figure 913. Line up clips on four corners of ceiling panel with holes inSL236SPi.14. Re-install four clips on ceiling