Chief YAMF1 User Manual download pdf (Page 6)

YAMF1 Installation Instructions

Cable Management

1. Attach all cables to display.

2. Open the cable management bracket by sliding it towards

the edge of the arm (See Figure 5).

NOTE: If necessary, cable management bracket attach screws

may be loosened using M2.5 hex key (S).

Figure 5

CAUTION: Ensure that adequate cable slack exists for

movement of display, and that cables will not be pinched

when bracket is closed.

3. Carefully insert cables into bracket (See Figure 6).

Figure 6

4. Close cable management bracket by sliding it back towards

the centerline of the arm (See Figure 5).

NOTE: If necessary, cable management bracket attach screws

may be tightened using M2.5 hex key (S).

CAUTION: Ensure that adequate cable slack exists for

movement of display, and that cables will not be pinched by

installation of cover (Q) or screws (R).

5. Carefully insert cables in cavity located in lower portion of

static mount arm (See Figure 7).

6. Using Phillips screwdriver, install cover (Q) with two #8-32 x

3/8" screws (R). (See Figure 7)

Figure 7

Adjustment of Arms and Centris Head

1. Using 3/16" hex key (U), slightly loosen or tighten the

adjustment screw(s) as necessary (See Figure ).

Figure 8

OPEN Position

CLOSED Position

View from Bottom

Attach

Screws

Cable Path (typical)

(Display not shown for clarity)

Cable Management

Bracket (in open position)

(R) x 2

Cable Path

(typical)

(Q)

(A)

Adjustment Screws

(Display not shown)

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Chief YAMF1 User Manual Page 6

Comments to this Manuals

Related products and manuals for Hardware Chief YAMF1