Chief CM2C40U Installation Manual download pdf (Page 10)

CM2C40 Installation Instructions

Figure 11

7. Route cables under cable pulley and up over top of cable

pulley. (See figure 10) and (See figure 11)

8. Route one cable from front (black) cable clamps through the

#2 cable opening and straight down next to the cable pulley

center shaft.

(See figure 10) and (See figure 11)

9. Route one cable from front (black) cable clamps through the #3

cable opening and straight down next to the other side of the

cable pulley center shaft. (See figure 10) and (See figure 11)

10. Route one cable from rear (gray) cable clamps through the

#2 cable opening and straight down next to the cable pulley

center shaft.

(See figure 10) and (See figure 11)

11. Route one cable from rear (gray) cable clamps through the #3

cable opening and straight down next to the other side of the

cable pulley center shaft. (See figure 10) and (See figure 11)

IMPORTANT ! : Ensure that cables are not twisted! Cables

from front (black) of upper cable clamp (See figure 10) must be

on front of cable pulley (See figure 11) and front of lower cable

clamp (See figure 10). Cables from rear (gray) of upper cable

clamp (See figure 10) must be on rear of cable pulley (See

figure 11) and rear of lower cable clamp (See figure 10).

12. Continue routing cable(s) down through lower cable

clamps. (See figure 10)

13. Tighten upper cable clamp making certain cables are

properly seated in clamp and are not pinched.

CAUTION: OVERTIGHTENING OF CABLE CLAMPS CAN

CRUSH CABLES LEADING TO DAMAGE TO EQUIPMENT!

DO NOT over tighten cable clamps.

14. Starting at upper cable clamp and working downward,

remove slack from all cables and tighten lower cable

clamps. (See figure 10)

15. Slide cable guide side cover over CM2 mount lining up two

holes in cable guide side cover with two holes in CM2

mount. (See figure 12)

Figure 12

16. Secure cable guide side cover to CM2 mount using two

screws (removed in Step 1). (See figure 13)

Figure 13

Cable

pulley

center

shaft

Cable guide

side cover

x 2

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 75 76

Comments to this Manuals

No comments

Chief CM2C40U Installation Manual Page 10

Comments to this Manuals

Related products and manuals for Flat panel ceiling mounts Chief CM2C40U