Chief K4G120 User Manual

INSTALLATION INSTRUCTIONSInstrucciones de instalaciónInstallationsanleitungInstruções de InstalaçãoIstruzioni di installazioneInstallatie-instructiesI

K4G120 Installation Instructions10AdjustmentsPivot Adjustment1. Extend or collapse column arm (X) as desired. (See Figure14)2. (Optional) Loosen or ti

Installation Instructions K4G12011Pitch1. Loosen knob on side of center faceplate assembly. (SeeFigure 17)2. Adjust pitch as desired. (See Figure 17)3

K4G120 Installation InstructionsUSA/International A 6436 City West Parkway, Eden Prairie, MN 55344P 800.582.6480 / 952.225.6000F 877.894.6918 / 952.89

K4G120 Installation Instructions2DISCLAIMERMilestone AV Technologies and its affiliated corporations andsubsidiaries (collectively “Milestone”), inten

Installation Instructions K4G1203DIMENSIONS 20.24514.1125.5DESK THICKNESSMAX2.2757.757.62.277.11180.78.86225.0501.819.7590.33.551.0226.0 19.28489.64.9

K4G120 Installation Instructions4LEGENDTighten FastenerApretar elemento de fijaciónBefestigungsteil festziehenApertar fixadorSerrare il fissaggioBeves

Installation Instructions K4G1205TOOLS REQUIRED FOR INSTALLATIONPARTS#25/16” (included)3/16” (included)5/32” (included)1/2”1/8” (included)A1 (2)[bumpe

K4G120 Installation Instructions6Assembly And Installation1. Use four 1/4-20 x 1 1/4” flat head cap screws (C) to securegrommet plate (U) to column (V

Installation Instructions K4G120710. Loosely install two 1/4-20 x 1/2” socket head carriagescrews (B1) through mounting holes on column arm (Z)bracket

K4G120 Installation Instructions8Display InstallationFaceplate Positioning1. Loosen height adjustment screws for each faceplate toadjust height. (See

Installation Instructions K4G1209Figure 114. Tighten all four screws (P). Do not over-tighten!NOTE: If roll adjustment is desired, do not tighten scre