Chief PSM Series User Manual download pdf

PLASMA STATIC WALL MOUNT PSM SERIES

WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY!

1 OF 2

P 800 . 582 . 6480 F 877 . 894 . 6918 W CHIEFMFG.COM E CHIEF@ CHIEFMFG.COM A

12800 HWY 13 S., STE. 500, SAVAGE, MN 55378

The overhead support must be capable of supporting five times the weight of the mount and equipment combined. 

If it cannot, it must be reinforced.

The Plasma Static Mount (PSM) Series wall mount is a quick disconnect mounting

system that is only 1.5" deep. Simply mount the PSM securely on a wall, lock the

plasma display in place using the convenient flag, and attach your audio/video cables.

Once the plasma display is mounted on the PSM, it is virtually invisible.

Before You Begin

• Caution: To prevent damage to the PSM which could affect or void the Factory 

warranty, and to the equipment that will be attached to it, thoroughly study all 

instructions and illustrations before you begin the installation. Pay particu-lar

attention to the “Important Warnings and Precautions” on Page 1.

• The PSM wall mount is designed to be installed using wall studs or supporting 

framework. When anchored in place, must be capable of supporting 100 pounds.

• If you have any questions about this installation, contact Chief Manufacturing 

at 1-800-582-6480.

IMPORTANT WARNINGS AND PRECAUTIONS!

WARNING: A WARNING alerts you to the possibility of serious injury or death if you

do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of damage or destruction of

equipment if you do not follow the corre-sponding instructions.

WARNING: Improper installation can result in serious personal injury! Make sure that

the structural members can support a redundant weight factor five times the total

weight of the equipment: if not, reinforce the structure before installing the PSM.

WARNING: Be aware also of the potential for personal injury or damage to the unit if

it is not adequately mounted.

WARNING: The installer is responsible for verifying that the wall to which the PSM

is anchored will safely support the combined load of all attached components or

other equipment.

WARNING: The weight of the PSM display must not exceed 100 lbs. (45.36 kg), the

maximum load capacity of the PSM.

WARNING: Make sure the flag securing the display is completely lowered at all

times except when removing or installing the display. The flag must be all the way

down when installing/removing cables.

CAUTION: Check the unit for shipping damage before you begin the installation.

PLASMA STATIC WALL MOUNT PSM SERIES

WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY!

2 OF 2

P 800 . 582 . 6480 F 877 . 894 . 6918 W CHIEFMFG.COM E CHIEF@ CHIEFMFG.COM A

12800 HWY 13 S., STE. 500, SAVAGE, MN 55378

The overhead support must be capable of supporting five times the weight of the mount and equipment combined. 

If it cannot, it must be reinforced.

PSM Assembly

WARNING: The PSM must be installed with correct end, indicated by"Mount This

Side Up", on top.

WARNING: It is the responsibility of the installer to verify that the wall to which the

PSM is anchored will safety support the combined load of all attached components

and equipment.

With the PSM correctly oriented (Mount This Side Up) and level, secure the 

PSM to the wall using a minimum of four fasteners (not included). Fasteners 

must be driven into the supporting wall studs or other supporting framework.

Mount the Display

1. Make sure no power is supplied to the display and the flag is in the up position

before attempting to mount the display.

2. Using two people, slide the display down over the PSM. Make sure all four

mounting feet engage all four slots in the PSM.

3. With the mounting feet of the display fully engaged in the slots of the PSM, secure

the display on the PSM by lowering the flag all the way down to the locked position.

If the flag does not fully engage, remove the display and make sure the brackets are

correctly installed.

NOTE: A security lock may be installed through the hole in the flag for additional

security.

WARNING: Make sure the flag securing the display is completely lowered at all times

except when removing or installing the display. The flag must be all the way down

when installing/removing cables.

Remove the Display

1. Disconnect all power/audio/video cables.

2. Unlock the display from the PSM by raising the flag all the way up to the unlocked

position.

3. Using two people, slide the display up and out of the PSM.

1.5" Deep

Secures Display

1 2

PSM SERIES 1

Summary of Contents

Page 1 - PSM SERIES

PLASMA STATIC WALL MOUNT PSM SERIESWARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY!1 OF 2P 800 . 582 . 6480 F 877

Page 2

PLASMA STATIC WALL MOUNT PSM SERIESWARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY!1 OF 2P 800 . 582 . 6480 F 877

Comments to this Manuals

No comments

Chief PSM Series User Manual

Browse online or download User Manual for Televisions Chief PSM Series. CHIEF PSM Series User Manual [en] [ru] [de] [es] [fr] [it]

Summary of Contents

Comments to this Manuals

Related products and manuals for Televisions Chief PSM Series