Chief ERD-20 Manual download pdf

ASSEMBLY INSTRUCTIONS

FOR

ERD - ECONOMY RACK DOOR

TOOLS YOU WILL NEED TO INSTALL YOUR ERD:

PENCIL OR OTHER MARKER

DRILL

DRILL BIT - 1/8”

PHILLIPS SCREWDRIVER

The hinge member that attaches to the front edge of the

rack is the same width and height as the rack, and so

should be lined up as such.

Measure 29/32” from the top and bottom of the edge

that you want to install the hinge side “ of the door

” or use the template below to mark the top and bottom.

Drill a 1/8” hole, about 1/2” deep, at each of these points.

Install a 5/8” screw in each hole.

Drill the rest of the holes and install the rest of the

screws. Your door should now swing freely and line up

evenly to all edges around the front of the rack.

Now with the door closed, turn the lock so that the “CAM”

( “L” shaped part that swings ) is horizontal. Hold the

“lock bracket” ( “U” shaped black bracket ) so that the

CAM almost hits the bottom of the bracket. This is the

position in which you should mark, drill and screw the

bracket onto the front edge of the rack. The door should

now lock correctly.

Remember to only clean the plastic sheet with water,

mild detergent and a soft cloth.

Summary of Contents

Page 1

ASSEMBLY INSTRUCTIONS FORERD - ECONOMY RACK DOORTOOLS YOU WILL NEED TO INSTALL YOUR ERD:PENCIL OR OTHER MARKERDRILLDRILL BIT - 1/8”PHILLIPS SCREWDRIVE

Comments to this Manuals

No comments

Chief ERD-20 Manual

Browse online or download Manual for Rack accessories Chief ERD-20. Chief ERD-20 rack accessory User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Rack accessories Chief ERD-20