CHIEF MANUFACTURING INC. 8802-000157 Rev C1-800-582-6480 952-894-6280 FAX 952-894-6918 ©2007 Chief Manufacturing8401 EAGLE CREEK PARKWAY, SUITE 700 w
Instruction Instructions NAV-12IMPORTANT WARNINGS and CAUTIONS!WARNING A WARNING alerts you to the possibility of serious injury or death if you do no
Instruction Instructions NAV-13INSPECT NAV-1 PARTS BEFORE ASSEMBLYRemove and Inspect the NAV-11. Open the shipping container and remove the NAV-1from
Instruction Instructions NAV-14NAV-1 INSTALLATION PROCEDURESTo install the NAV-1 Lens Support (hereinafter called theNAV-1), perform the following pro
Instruction Instructions NAV-15Attaching NAV-1 to RPAAttach the NAV-1 to the RPA projector mount, as follows:NOTE: The four screws and washers removed
Instruction Instructions NAV-16Installing and Adjusting LensInstall and adjust the NAV-1 lens, as follows:1. Attach conversion lens plate behind the
Instruction Instructions NAV-17Adjusting NAV-1 to Projector LensThe NAV-1 lens support can be adjusted toaccommodate different projector models and le
Instruction Instructions NAV-28INSPECT NAV-2 PARTS BEFORE ASSEMBLYRemove and Inspect the NAV-21. Open the shipping container and remove the NAV-2from
Instruction Instructions NAV-29NAV-2 INSTALLATION PROCEDURESExcept for the “Installing and Adjusting Lens” procedureprovided in this section, the NAV-
Comments to this Manuals