Chief CMA009012 Datasheet download pdf

CHIEF MANUFACTURING INC. 8803-000008 Rev. A

1-800-582-6480 952-894-6280 FAX 952-894-6918 2003 Chief Manufacturing

12800 HIGHWAY 13 SOUTH, SUITE 500 www.chiefmfg.com

SAVAGE, MINNESOTA 55378 USA 03/03

INSTALLATION INSTRUCTIONS

EXTENSION COLUMNS

CMA-006009 to CMA-1012

The CMA-006009 through the CMA-1012 extension columns can be used with any NPT 1 ½” coupler to

lower your mount to the desired height. The extension columns provide vertical adjustments in 1”

increments. The column tube telescopes and bolts through at the desired height.

WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY!

All components must be securely fastened to a structural member capable of supporting five

times the combined weight of all components plus the equipment being mounted. If it cannot

support this weight, the structure MUST be reinforced.

The maximum weight to be installed on the column is 500 pounds (226.8 Kg).

Unpack and check contents:

(1) Extension Pipe (1) 3/8-16 Nylock Nut

(1) Adjuster Tube (2) 5/16” Set Screws

(1) 3/8-16 x 2½” Bolt (1) 5/32” Allen Wrench

INSTALLATION INSTRUCTIONS

1. Slide adjuster tube into extension pipe to desired length, matching holes in adjuster tube with extension pipe.

2. Secure adjuster tube to extension pipe using 3/8-16 x 2½” bolt and 3/8-16 Nylock nut.

3. Install both 5/16” set screws in holes of extension tube on each side of 3/8-16 x 2½” bolt.

ALWAYS THREAD EXTENSION PIPE AND ADJUSTER TUBE AT LEAST 6

OR 7 FULL TURNS INTO MATING SURFACES.

WARNING!

CHIEF MANUFACTURING INC. 8803-000008 Rev. A 1-800-582-6480 952-894-6280 FAX 952-894-6918 2003 Chief Manufacturing 12800 HIGHWAY 13 SOUTH, SUITE 500

No comments

Chief CMA009012 Datasheet