Chief K1P Series User Manual

INSTALLATION INSTRUCTIONSInstrucciones de instalaciónInstallationsanleitungInstruções de InstalaçãoIstruzioni di installazioneInstallatie-instructiesI

K1P Series Installation Instructions10Lift Arm Tension Adjustment1. Use 3/16” hex key (L) to adjust lift arm tension adjustmentscrew. (See Figure 11)F

Installation Instructions K1P Series11Display RemovalWARNING: Only remove display from mount when thedisplay can be lifted up from the mount! DO NOT r

K1P Series Installation Instructions12Cable Management1. Press insides of cable management covers at both ends tounhinge tabs on either end of cable m

Installation Instructions K1P Series13

K1P Series Installation Instructions14

Installation Instructions K1P Series15

USA/International A 6436 City West Parkway, Eden Prairie, MN 55344P 800.582.6480 / 952.225.6000F 877.894.6918 / 952.894.6918Europe A Franklinstraat 14

K1P Series Installation Instructions2DISCLAIMERMilestone AV Technologies and its affiliated corporations andsubsidiaries (collectively “Milestone”), i

Installation Instructions K1P Series3DIMENSIONSK1P110DYNAMIC HEIGHTADJUST RANGE14.581.58370.340.1TILT RANGE75 UP10 DOWN0.7819.8DYNAMIC LIFT ARMLENGTH

K1P Series Installation Instructions4DYNAMIC HEIGHTADJUST RANGE24.3111.31617.6287.4TILT RANGE75 UP10 DOWN6.75171.5LENGTH RANGESTRAIGHT ARM = MAXFULL U

Installation Instructions K1P Series5LEGENDTighten FastenerApretar elemento de fijaciónBefestigungsteil festziehenApertar fixadorSerrare il fissaggioB

K1P Series Installation Instructions6TOOLS REQUIRED FOR INSTALLATIONPARTS#23/16” (included)1/8” (included)5/32” (included)A (1)[Pole clamp arm](K1P110

Installation Instructions K1P Series7Assembly And InstallationConnecting to Pole1. Determine approximate location for mount keeping in minddisplay siz

K1P Series Installation Instructions8WARNING: Exceeding the weight capacity can result inserious personal injury or damage to equipment! It is theinst

Installation Instructions K1P Series9Handle Installation (K1P22 model only)1. Loosen four screws securing handle brackets to K1P22array. (See Figure 7