Chief PAC150 User Manual download pdf (Page 5)

Installation Instructions PAC-150

Assembly And Installation

The optional PAC-150 video conference shelf assembly is

designed for attachment to Chief floor stands or any mount with

a medium or large faceplate.

1. Using two 1/4-20 x 1/2" hex bolts (F), two 1/4" lock washers

(H), and two 1/4-20 hex nuts (G), secure height-adjustment

plate (B) to top of cart or faceplate. (See Figure 1)

Figure 1

2. Install two felt pads (C) on bottom of shelf (A) to prevent

scratches on top of display panels when shelf is lowered.

(See Figure 2)

Figure 2

3. Using two thumb knobs (C) and two 5/16" flat washers (E),

secure the shelf (A) to the height-adjustment plate (B). (See

Figure 3)

Figure 3

Camera Mounting

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all equipment and accessories mounted on the PAC150 does

not exceed 10 lbs (4.54 kg).

NOTE: Mounting options will vary depending on the type of

camera being mounted.

1. Install 1/4-20 x 3/8" Phillips pan machine screw (J) through

one of the mounting holes on shelf and into the hole on the

bottom of the camera. (See Figure 4)

Figure 4

NOTE: Camera can also be secured to mount by threading a

tie through outside slots on camera mount and around

the camera. (See Figure 4)

NOTE: It is also acceptable to mount the camera directly to the

shelf without any screws or ties.

(B)

(F) x 2

(G) x 2

(H) x 2

(A)

(E) x 2

camera (example)

(J)

(A)

cable tie slots

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Chief PAC150 User Manual Page 5

Comments to this Manuals

Related products and manuals for Hardware Chief PAC150