Chief PAC140 User Manual download pdf

INSTALLATION INSTRUCTIONS

8800-000028, Rev. B 06/27/05

CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: [email protected]

PAC-140

Q-CLAMP

Prior to assembly, unpack carton completely and verify contents shown in Figure 1.

If you are missing any of the following components, please contact Customer Service at 1-800/582-6480.

Figure 1

(2) Q-Clamp

(1) 5/32” Allen Key

(2) ¼-20 x 7/8” Button Head Cap Screw

BEFORE PROCEEDING: Read installation instructions completely.

CAUTION! PLASMA DISPLAYS ARE EXTREMELY FRAGILE.

1. With the aid of another person, lift display up to the Chief mount, aligning the mounting buttons on the display with the

teardrop slots in the face plate. See Figure 2. (NOTE: PTC cart shown. Other mounts are similar.)

2. Place Q-Clamp over mounting button. Insert a ¼-20 button head cap screw into the bottom of the mount face plate.

Thread the cap screw into the bottom of the Q-Clamp. Tighten the cap screw until the Q-Clamp is snug on the mounting

button. See Figure 3 and Figure 4.

3. Repeat Step 2 to install the second Q-Clamp.

4. Raise the latching flag on the face plate, securing the display. Make sure latching flag is completely engaged.

Figure 2

Figure 3

Figure 4

-Clam

Thread

Cap Screw

into

Q-Clamp

Face plate

Mounting

Button

INSTALLATION INSTRUCTIONS 8800-000028, Rev. B 06/27/05 CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: [email protected] P

No comments

Chief PAC140 User Manual