Chief K2W22HB Manual download pdf (Page 11)

Installation Instructions K2W Series

4. Position display with faceplate attached above mount. (See

Figure 8)

5. Slide faceplate onto mounting head until quick release tab

clicks into place. (See Figure 8)

Figure 8

Handle Installation (K2W21/22H models only)

1. Loosen four screws securing handle brackets to K2W21H/

K2W22H array. (See Figure 9)

2. Install uprights of handle (J2) into handle brackets located

on the back of array. (See Figure 9)

Figure 9

3. Position handle (J2) at desired height and secure by

tightening button head cap screws attaching handle

brackets to array. (See Figure 10)

Figure 10

Adjustments

Portrait Adjustment (K2W21/22H Models only)

1. The monitor may be adjusted 90 degrees in either direction

in order to provide a portrait view of the monitor. (See Figure

11)

2. Use 3/16” hex key (L) to adjust rotational adjustment screw

to adjust rotational tension. (See Figure 11)

Figure 11

(J2)

x 4

(J2)

x 4

portrait tension

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

Chief K2W22HB Manual Page 11