Chief TPM2540 Installation Manual download pdf

INSTALLATION INSTRUCTIONS

CHIEF MANUFACTURING INC. 8804-000205

1-800-582-6480 952-894-6280 FAX 952-894-6918 2004 Chief Manufacturing

8401 EAGLE CREEK PKWY, STE. 700 www.chiefmfg.com

SAVAGE, MINNESOTA 55378 USA 11/06

ALL COMPONENTS MUST BE SECURELY FASTENED TO A

STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4

TIMES THE COMBINED WEIGHT OF ALL COMPONENTS

PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT

SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE

REINFORCED.

THE MAXIMUM WEIGHT TO BE INSTALLED ON THE

MOUNT IS 1

POUNDS (

79.38

KG).

PSB-2540

PLASMA DISPLAY MOUNTING BRACKET

Prior to assembly, unpack carton completely and verify contents.

If you are missing any of the following components, please contact Customer Service at 1-800/582-6480

(2) Plasma Side Bracket (2) Plasma Top/Bottom Bracket

(4) Mounting Button - Tapped (8) 10-24 x .5 Button Head Cap Screw

(4) M8 x 25mm Philips Head Cap Screw (4) .75 X .344 X .50 Nylon Spacer

(4) Steel Washer (1) 1/8 Allen Key

BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY

PLASMA DISPLAYS ARE EXTREMELY FRAGILE.

1. Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with

chamfered hole of mounting button (larger surface) facing bracket, to top and bottom brackets (four places)

(see Figure 2 & Figure 3).

CAUTION!

Figure 1

WARNING!

Figure 2

Figure 3

1 2

INSTALLATION INSTRUCTIONSCHIEF MANUFACTURING INC. 8804-0002051-800-582-6480 952-894-6280 FAX 952-894-6918 2004 Chief Manufacturing8401 EAGLE CREEK P

2. Using four 10-24 button head cap screws, attach top and bottom to side brackets (see Figure 4 &Figure 5).3. Place Nylon spacers over mounting h

No comments

Chief TPM2540 Installation Manual