Chief PLP2000B Installation Manual download pdf

CHIEF MANUFACTURING INC. 8805-000183 Rev F

8401 EAGLE CREEK PARKWAY, STE. 700 www.chiefmfg.com

SAVAGE, MINNESOTA 55378 USA 03/08

INSTALLATION INSTRUCTIONS

PLP Series Wall Mount

The PLP Series wall mount accommodates large flat

screens weighing up to 200 lbs (90.72kg). The teardrop

holes in the mount allow for quick connect/disconnect of

the screen, thus simplifying installation and maintenance

processes.

The top and bottom mounting brackets are adaptable to

supporting framework with wood studs that are 16” on

center or 24”on center.

The mount has integrated lateral shift, allowing for four

different mounting options. For dual wood studs 16” on

center, the lateral shift is

4.5 inches. For dual wood

studs 24” on center, the lateral shift is

0.5 inches.

The display can be pulled and tilted by hand into any

position in the zero-to-15 degree tilt range and remain

stationary.

The bottom of the mount pulls forward 4” from the wall

and locks into place for installation of cable connections.

The mount also uses Chief’s exclusive Q-Latch™

mounting system, which offers quick connect/disconnect

display mounting. The display is secured to the mount

with a latching flag. For additional security, you can lock

the latching flag in place by adding a padlock.

PLP Series

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - PLP Series Wall Mount

Page 2 - BEFORE YOU BEGIN

Installation Instructions PLP Series2! IMPORTANT: If the installation of this product requires OSHPD seismic approval, refer to OSHPD pre-approval

Page 3 - DIMENSIONAL

Installation Instructions PLP Series3DIMENSIONALDRAWING17.00.691.874.2415.5118.3813.1916.0016.0016.0024.005/16" x 1" SLOT5/16" x 6"

Page 4 - PARTS LIST

Installation Instructions PLP Series4CONTENTSDIMENSIONAL DRAWING ... 3TOOLS REQUIRED FOR INSTALLATION...

Page 5 - PLP INSTALLATION

Installation Instructions PLP Series5PLP INSTALLATIONPerform the following procedures to mount the PLP.Select Mounting LocationTo select the mounting

Page 6 - PLP INSTALLATION (Cont’d)

Installation Instructions PLP Series6PLP INSTALLATION (Cont’d)Mount the PLPTo mount the PLP, do the following:1. Holding the PLP against the wall, sel

Page 7 - REMOVE THE DISPLAY

Installation Instructions PLP Series7ATTACH PSB TO THE DISPLAYTo attach the PSB to the display, do the following: To help your identify the correct P

Page 8 - CABLE CONNECTION

Installation Instructions PLP Series8TILT ADJUSTMENTTo tilt the display 0° to 15° down, do the following:1. Manually tilt the display 0° to 15° down i